pb lead-free parts a - 2006 20 - oct. LHRF13233-PF ligitek electronics co.,ltd. property of ligitek only LHRF13233-PF super bright round type led lamps data sheet doc. no : qw0905- rev. : date :
+ - page 1/5 part no. LHRF13233-PF ligitek electronics co.,ltd. property of ligitek only package dimensions directivity radiation note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. 2.54typ 1.5max 0.5 typ 1.0min 25.0min 9.0 7.8 5.75 4.8 30 0 60 50%75% 25%0 25% 100% -30 -60 50% 75% 100%
note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. absolute maximum ratings at ta=25 typical electrical & optical characteristics (ta=25 ) t opr operating temperature color part no LHRF13233-PF emitted red algainp material lens water clear storage temperature tstg i f forward current power dissipation reverse current @5v electrostatic discharge( * ) peak forward current duty 1/10@10khz esd ir pd i fp parameter symbol -40 ~ +85 viewing angle 2 1/2 (deg) forward voltage @ ma(v) dominant wave length dnm spectral halfwidth nm luminous intensity @20ma(mcd) 18 20 min. 63020 1.5 min. max. typ. 1500 2.42700 -40 ~ +100 page2/5 30 ma 2000 10 v a 75 90 mw ma hrf ratings unit ligitek electronics co.,ltd. property of ligitek only static electricity or power surge will damage the led. use of a conductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. * part no. LHRF13233-PF
r e l a t i v e i n t e n s i t y @ 2 0 m a 600 wavelength (nm) 550 0 700 650 0.5 0.5 r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 20 ambient temperature( ) fig.5 relative intensity vs. wavelength 1.0 ambient temperature( ) 0.8 -0 -20 -4060 40 2080100 0 -40-20-060 4080100 fig.4 relative intensity vs. temperature 2.5 1.0 0.9 1.1 1.5 1.0 2.0 fig.3 forward voltage vs. temperature 1.2 3.0 100 r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a f o r w a r d c u r r e n t ( m a ) forward current(ma) forward voltage(v) 1.5 1.0 0.1 2.5 2.03.01.010 0 1.0 10 0.5 1.0 1.5 2.0 1001000 fig.2 relative intensity vs. forward current fig.1 forward current vs. forward voltage 1000 3.5 2.5 typical electro-optical characteristics curve ligitek electronics co.,ltd. property of ligitek only 3.0 hrf chip page 3/5 part no. LHRF13233-PF
dip soldering preheat: 120 c max preheat time: 120seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) note:1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. 100 0 0 preheat 25 120 2 /sec max 250 200 time(sec) 260 temp( c) 5 /sec max 260 c3sec max page 4/5 soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time only) distance:2mm min(from solder joint to body) 2.wave soldering profile ligitek electronics co.,ltd. property of ligitek only 120 seconds max part no. LHRF13233-PF
1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs 1.t.sol=260 5 2.dwell time= 10 1sec. 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles 1.t.sol=230 5 2.dwell time=5 1sec solderability test solder resistance test thermal shock test high temperature high humidity test this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. this test intended to see soldering well performed or not. mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 the purpose of this test is the resistance of the device under tropical for hours. mil-std-202:103b jis c 7021: b-11 test condition 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) low temperature storage test high temperature storage test operating life test test item reliability test: mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. jis c 7021: b-12 the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. mil-std-883:1008 jis c 7021: b-10 description reference standard ligitek electronics co.,ltd. property of ligitek only page 5/5 part no. LHRF13233-PF
|
